Shop > Helmets > Helmet Cords & Adapters > Helmet Cords > Fixed-wing Helmet Cords > Fixed-wing Cords – ANR Using Aircraft Power > Fixed-wing Cords – ANR Using Aircraft Power

Fixed-wing Cords – ANR Using Aircraft Power

 

Cords for ANR Using Aircraft Power are made with an internal power lead allowing the ANR to be powered by the aircraft.

They fit HGU-55, HGU-33, HGU-68/P, and other fixed wing helmets.

 

Explore Cord Options, Request a Quote, or Order a Cord.  Popular options are listed, and more are available. Please call with questions.

Cord and Microphone on Same Side or Opposite Sides

The microphone and communications cord are usually on the same side of the helmet.  If you want them on opposite sides, you have that choice.

Aircraft Power Jack for ANR Aircraft Power Jack for ANR

Cords for ANR using aircraft power require a power jack in the aircraft. A TJT120MS communications-and-power jack allows the use of an ANR cord with a single U-384 plug. A 2.1 mm DC power jack allows the use of an ANR cord with a 2.1 mm power plug and separate communications plugs. The aircraft 12-or-28-volt power must also be reduced to 9 volts for the ANR.

Helmet Cords for ANR Using Aircraft Power

These cords end in a U-384 plug and require a matching TJT120MS communications-and-power jack in the aircraft.

Helmet Cords – No Volume Control Helmet Cords – No Volume Control

Helmet Cords without a volume control.

Helmet Cords – Volume Control Lead Helmet Cords – Volume Control Lead

Helmet cords with a volume control wire lead but without a volume control.

Six-inch and Extender Cords for ANR Using Aircraft Power

These six-inch and extender cords are designed for ANR using aircraft power. Six-inch cords install on your helmet and require an extender cord to make a complete communications cord. They allow you to unplug the six-inch cord from the extender cord and exit the aircraft wearing your helmet. They also allow quick-disconnect in an emergency, which is recommended by the NTSB.

Six-Inch Helmet Cords for ANR Using Aircraft Power Six-Inch Helmet Cords for ANR Using Aircraft Power

These six-inch cords install on your helmet and can be used with any of the extender cords on this page. They end in a U-384 plug that mates with the U-385 jack on the extender cord.

Extender Cords for ANR Using Aircraft Power with a U-384 Plug Extender Cords for ANR Using Aircraft Power with a U-384 Plug

Use these extender cords in aircraft with a TJT120MS communications-and-power jack. They can be used with any of the six-inch cords on this page. They have a U-385 jack that mates with the U-384 plug on the six-inch cord, and they end in a U-384 plug.

Extender Cords for ANR Using Aircraft Power with a 2.1 mm Power Plug Extender Cords for ANR Using Aircraft Power with a 2.1 mm Power Plug

Use these extender cords in aircraft with a 2.1 mm ANR power jack. They can be used with any of the six-inch cords on this page. They have a U-385 jack that mates with the U-384 plug on the six-inch cord, and they end in a 2.1 mm power plug and the communications plugs you select.