Shop > Helmets > Helmet Cords & Adapters > Helmet Cords > Helo Helmet Cords > Helo Helmet Cords – ANR Using Aircraft Power > Helo Helmet Cords – ANR Using Aircraft Power

Helo Helmet Cords – ANR Using Aircraft Power

 

Cords for ANR Using Aircraft Power are made with an internal power lead allowing the ANR to be powered by the aircraft without using a battery.

They fit HGU-56/P, HGU-84/P, SPH-5, SPH-4B, and SPH-4 helicopter helmets.

Explore Cord Options, Request a Quote, or Order a Cord. Popular options are listed, and more are available. Please call with questions.

Aircraft Power Jack for ANR Aircraft Power Jack for ANR

Cords for ANR using aircraft power require a power jack in the aircraft. A TJT120MS communications-and-power jack allows the use of an ANR cord with a single U-384 plug. A 2.1 mm DC power jack allows the use of an ANR cord with a 2.1 mm power plug and separate communications plugs. The aircraft 12-or-28-volt power must also be reduced to 9 volts for the ANR.

Helmet Cords for ANR Using Aircraft Power

These cords end in a U-384 plug and require a matching TJT120MS communications-and-power jack in the aircraft.

Helmet Cords – No Volume Control Helmet Cords – No Volume Control

Helmet Cords without a volume control.

Helmet Cords – Volume Control Lead Helmet Cords – Volume Control Lead

Helmet cords with a volume control wire lead but without a volume control.

Six-inch and Extender Cords for ANR Using Aircraft Power

These six-inch and extender cords are designed for ANR using aircraft power. Six-inch cords install on your helmet and require an extender cord to make a complete communications cord. They allow you to unplug the six-inch cord from the extender cord and exit the aircraft wearing your helmet. They also allow quick-disconnect in an emergency, which is recommended by the NTSB.

Six-inch Helmet Cords for ANR Using Aircraft Power Six-inch Helmet Cords for ANR Using Aircraft Power

These six-inch cords install on your helmet and can be used with any of the extender cords on this page. They end in a U-384 plug that mates with the U-385 jack on the extender cord.

Extender Cords for ANR Using Aircraft Power with a U-384 Plug Extender Cords for ANR Using Aircraft Power with a U-384 Plug

Use these extender cords in aircraft with a TJT120MS communications-and-power jack. They can be used with any of the six-inch cords on this page. They have a U-385 jack that mates with the U-384 plug on the six-inch cord, and they end in a U-384 plug.

Extender Cords for ANR Using Aircraft Power with a 2.1 mm Power Plug Extender Cords for ANR Using Aircraft Power with a 2.1 mm Power Plug

Use these extender cords in aircraft with a 2.1 mm ANR power jack. They can be used with any of the six-inch cords on this page. They have a U-385 jack that mates with the U-384 plug on the six-inch cord, and they end in a 2.1 mm power plug and the communications plugs you select.